Impact Outdoors

NEW ZEALAND / OUTDOOR LIVING

Plan

4 September 2026

Aluminium vs Timber Pergola: Which Lasts Longer in NZ?

Aluminium vs Timber Pergola: Which Lasts Longer in NZ?

Timber needs regular staining or sealing to resist rot, warping and UV damage - typically every one to two years depending on exposure - while aluminium doesn't rust or rot and needs almost no upkeep beyond an occasional rinse.

What each material is actually rated for

Our aluminium Elite Canopy and Opening Louvre frames are high-grade 6063-T6 aluminium with an anodised powder coating providing 99.9% (canopy) to 100% (louvre) UV protection, wind resistance up to 160-200km/h depending on the system, snow loading up to 50-80cm, and a 10-year structural warranty. A timber pergola's real-world lifespan depends heavily on timber species, treatment level and how consistently it's maintained - under-maintained timber in an exposed NZ site can need significant remedial work well inside a decade, where a neglected aluminium frame still won't rust or rot.

Coastal and wet-climate considerations

In coastal areas especially, salt-laden air accelerates corrosion in untreated or poorly coated metal fixings and accelerates rot in timber that isn't kept properly sealed - aluminium's corrosion resistance is a significant advantage here, and it's one of the reasons branches in Wellington, Tauranga, Auckland and other coastal regions see more aluminium specified than timber for anything long-term.

The trade-off

Aluminium typically costs more upfront but far less over the structure's lifetime once you account for timber's ongoing staining, sealing and occasional board replacement - run the comparison over 10-15 years, not just the install invoice, and aluminium usually comes out ahead on total cost even though the day-one price is higher. Timber can still make sense where matching an existing timber deck or home exterior aesthetically matters more than lifetime cost, or where the budget genuinely doesn't stretch to aluminium up front.

Explore Elite Canopies Read the full buyer guide

Which suits your region

Coastal branches - Wellington, Tauranga, Auckland - see more aluminium specified for exactly the corrosion-resistance reasons above; inland regions with less salt exposure see a slightly more even split, though aluminium's near-zero maintenance still makes it the more common choice nationwide once people weigh up the staining/sealing cycle a timber structure asks for.

Resale and sustainability

A well-maintained aluminium structure tends to show its age less at resale time than timber, which can visibly weather if a previous owner let maintenance lapse - a buyer inspecting a property can usually tell at a glance whether a timber pergola has been kept up, where aluminium's finish is more forgiving of a few missed maintenance cycles. Aluminium is also fully recyclable at end of life, which is worth factoring in if sustainability credentials matter to your decision alongside the practical cost-over-time argument.

← Back to Blog